QSC RMX 1450 2 Channel Professional Power Amplifier EXCELLENT CONDITION

QSC - RMX 1450 2 Channel Professional Power Amplifier With rear rack ears. QSC's RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on.

The RMX Series delivers unmatched performance at a breakthrough price. The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2-ohm speaker loads. RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion. Independent defeatable clip limiters reduce distortion without sacrificing peak performance.

Selectable low-frequency filters boost system response, protect speakers, and ensure low-end tightness by more precisely matching the amplifier's range to the loudspeakers. Barrier strip, XLR, and 1/4 balanced inputs plus Speakon and binding post outputs provide easy connections. Low-noise variable speed fans with rear-to-front air flow keep amplifiers and racks cool.

Output Wattage, Stereo Mode (EIA: both channels driven). 8 ohms EIA 1 kHz 0.1% THD: 280W. 4 ohms EIA 1 kHz 0.1% THD: 450W. 2 ohms EIA 1 kHz 1% THD: 700W. Output Wattage, Bridge Mono Mode.

8 ohms EIA 1 kHz 0.1% THD: 900W. 4 ohms EIA 1 kHz 1% THD: 1400W. Signal to Noise (20 Hz-20 kHz): 100dB. Distortion (SMPTE-IM): Less than 0.01%. Voltage Gain: 40x (32 dB). Distortion (typical): 20 Hz-20 kHz: 10 dB below rated power: Less than 0.03% THD 4 and 8 ohms. 1.0 kHz and below: full rated power: Less than 0.03% THD 4 and 8 ohms. Frequency Response: 20 Hz-20 kHz, 0/-1 dB, -3 dB points: 5 Hz-50 kHz. Damping Factor (1 kHz and below): greater than 300 at 8 ohms.

Input Impedance: 10 K ohms unbalanced, 20 K ohms balanced. Input Clipping: 10 Vrms (+22dBu). Cooling: Continuously variable speed fan, rear-to-front air flow. Connectors (each channel): Input: Active balanced; barrier strip, XLR, and 1/4 (6.3 mm).

TRS tip and XLR pin 2 positive. Output: "Touch-proof" binding posts and Neutrik Speakon. Controls: Front: AC switch, Ch. Indicators: PWR-ON: Green LED SIGNAL: Yellow LED (1 per channel) CLIP: Red LED (1 per channel). Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection.

Stable into reactive or mismatched loads. Load Protection: Turn-on/off muting, AC coupling (850, 1450), triac crowbar (2450, on each channel). Power Requirements: 100, 120 VAC, 50-60 Hz.

Dimensions: rack mounting: 48.3cm (19"); 8.9cm (3.5") tall (2 rack spaces); 40cm (15.9) deep (rack mounting to rear support ears). Net Weight: 18.2 kg 40 lbs. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "db_express" and is located in this country: US. This item can be shipped to United States.

Brand: QSC
Type: Power Amplifier
Audio Inputs: TRS/Audio Jack, XLR
Number of Channels: 2
Number of Inputs: 2
Color: Black
Model: RMX 1450
Features: Rack Mountable
MPN: RMX1450
Audio Outputs: Banana Speaker Jacks, Raw Cable Speaker Jacks, Speak On
Number of Outputs: 2