Lot of 2 QSC CMX 800V 2-Channel 2x800W @ 4? Professional Power Amplifier 2RU

Professional Power Amplifier 2RU w/ Cable. These rugged, fan-cooled, 2-channel, 2RU amplifi ers provide high-value performance and power in a strong, compact chassis. Four models: the CMX 300V, CMX 500V, CMX 800V and CMX 2000V. The CMX 2000V is covered in a separate manual. Fully selectable low-frequency fi ltering; choice of 30 or 50 Hz roll-off.

Stereo (dual-channel), parallel-input, or Bridge Mono operating modes. Balanced inputs - XLR, ¼ (6.3 mm) TRS, and barrier strip.

Pluggable terminal block and SpeakonT outputs. Front panel LED indicators for signal and clip and power. Stereo mode, both channels driven CMX. 8O / FTC 20 Hz -20 kHz / 0.1% THD - 450 W.

8O /EIA 1 kHz / 0.1% THD - 500 W. 4O / FTC 20 Hz - 20 kHz / 0.1% THD - 650 W. 4O /EIA 1 kHz / 0.5% THD - 800 W. 2O /EIA 1 kHz / 1% THD - 1200 W. 70V Direct Drive /EIA 1 kHz / 1% THD - 400 W.

The CMX Series is packed full of professional features that increase performance and flexibility. "Flex-Use" loading options allow you to drive low-impedance loads down to 2 ohms and certain models to drive 70 and 100V distributed loudspeaker systems. "Flex-Use" Input connectivity choices including actively balanced barrier strip, XLR, or ¼ TRS.

"Flex-Use" Output connectivity choices include NL4 SpeakonT and detachable terminal block. Rack mountable with chassis less than 16 or 40.6 mm deep. 1 dB recessed, detented gain controls for fast, accurate and repeatable settings. Tamper-proof security cover for gain controls.

Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection. Low-noise variable-speed fans with rear-to-front airflow keep amplifiers and racks cool. Condition Description: Used, tested working. Included: Devices with power cables only.

Any other accessories are not included. Stereo Mode (both channels driven). 8O / FTC 20 Hz - 20 kHz / 0.1% THD - 450 W. 8O / EIA 1 KHZ / 0.1% THD - 500 W. 4O / FTC 20 HZ - 20 KHZ / 0.1% THD - 650 W.

4O / EIA 1 KHZ / 0.5% THD - 800 W. 2O / EIA 1 KHZ / 1% THD - 1200 W. 70 V - Direct drive / EIA 1 kHz / 1% THD - 400 W. 8O / FTC 20 Hz - 20 kHz / 0.1%THD - 1300 W. 8O / EIA 1 kHz / 0.1%THD - 1500 W.

4O / EIA 1 kHz / 1%THD - 2400 W. 70 V - Direct drive / EIA 1 kHz / 1% THD - 2000 W. 100 V - Direct drive / EIA 1 kHz / 1% THD - 2300 W. Signal to Noise (20 Hz - 20 kHz) 8O > -100 dB. Input Sensitivity 8O 1.23 V (+4.0 dBu).

Output Circuitry 2-tier Class H. Typical, 1/8 power, pink noise at 4O.

120 VAC - 6.3 A. 230 VAC - 3.2 A. Severe, 1/3 power pink noise at 4O. 120 VAC - 15.6 A.

230 VAC - 7.8 A. Frequency Response -3 dB points: 5 Hz and 50 kHz.

Damping Factor > 300 at 8O. Input Impedance (O) 10 kO unbalanced / 20 kO balanced.

Input Clipping 10 Vrms (+22 dBu). Cooling Continuously variable speed fan, back-to-front air flow. Input: Active balanced; barrier strip, XLR and ¼ (6.3 mm). TRS tip and XLR (pin 2 positive). Output: Detachable terminal block and SpeakonT.

Front: AC Switch, Channel 1 and Channel 2 gain knobs. Indicators Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel). Amplifier Protection Stable into reactive or mismatched loads. Load Protection On/off muting, AC Coupling (CMX 300V and CMX 500V), triac crowbar (CMX 800V on each channel).

Dimensions (HWD) 3.5" (2RU) x 19" x 15.9 (89 mm x 483 mm x 400 mm). This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "refurbconnect" and is located in this country: US.

This item can be shipped to United States.

Brand: QSC
Type: Power Amplifier
Number of Channels: 2
Color: Black
Model: QSC CMX 800V
Features: Rack Mountable
Audio Outputs: Banana Speaker Jacks, Headphone Jack, Raw Cable Speaker Jacks