Channel Professional Power

LEA Professional CS354D 4-Channel 350W Dante Power Amp withDSP, Ethernet

LEA Professional CS354D 4-Channel 350W Dante Power Amp withDSP, Ethernet

LEA Professional CS354D 4-Channel 350W Dante Power Amp withDSP, Ethernet

LEA Professional CS354D 4-Channel 350W Dante Power Amp with DSP, Ethernet, IoT-enabled. Part of LEA Professional's Internet of Things (IoT) enabled amplifiers, the CS354D is a 350-watt per channel, 4-channel power amp with Dante® that can output at HiZ (70V or 100V) or LoZ selectable by channel. The amp has 3 ways to connect, use the amp's built in WiFi access point, connect to the venue's WiFi, or use the FAST Ethernet to connect to any local area network via the Cat5 or Cat6 cable. Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power to that channel without sacrificing and amplifier channel. Direct LoZ and HiZ (70V or 100V) selectable per channel.

3 Way to connect: Built-in WiFi access point, Connects to existing WiFi network, Local area network Ethernet connection. Universal switch mode power supply with PFC.

Operates from 100VAC to 24VAC +/- 15%. 96kHz Analog Devices DSP with input routing, multiple 48dB/octave crossover filters, 8 parametric EQ filters, user configurable speaker limiters, and real-time monitoring. External I/O port for remote on/off and fault monitoring. High efficiency Class D output stage for low AC current draw.

Inputs: 4 channels with user selectable 26dB and 34dB input sensitivity, Dante: 8x8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67 (configurable via the Dante Controller software). THD+N: 0.1% (20Hz - 20kHz).

Frequency Response: 20Hz to 20kHz +/-0.5dB 4? Signal to Noise level: 105dB 20Hz to 20kHz referenced to 8? Crosstalk: 70dB (20Hz to 20kHZ).

DSP Architecture: Analog Devices Sigma 06kHz DSP processor with 32-bit Core with sample rate converters. Amplifier Output Classification: Class D with proprietary Smart Power Bridge Technology allowing bridged output function without sacrificing and amplifier channel.

Crossovers: up to 48dB/octave IIR filters Linkwitz, Riley, and Butterworth. Input Matrix: Routable matrix, any input to any output with primary and secondary input priority. Output Delay: 100ms per channel.

Parametric EQ 8-band parametric EQ per channel. Output Protection: DC, VHF, and AC mains protection, overtemp and current limiter, fan fault detection.

User Adjustable Limiting: Peak voltage and RMS voltage. Load Monitoring: Realtime Load Monitoring, and pilot tone detection from internal or external sources.

External I/O: External I/O in toggles remote on/off, external I/O out indicates amplifier health. Power Supply: Universal switch mode power supply with Power Factor Correction. AC Mains: 100VAC - 240VAC +/-15% 50Hz or 60Hz. Dimensions: 14.25" x 19" x 1RU (362mm x 482mm x 1RU).

Cooling: Front to rear variable fan speed cooling. Fan noise at 1m: 50dB at idle, 57dB at 50%, 63dB at full speed.

This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers". The seller is "snob_productions" and is located in this country: US. This item can be shipped to United States.

  • Brand: LEA Professional
  • Type: Power Amplifier
  • Model: Connect Series 354D
  • Manufacturer: LEA Professional
  • MPN: 354D


LEA Professional CS354D 4-Channel 350W Dante Power Amp withDSP, Ethernet